Description
This document describes ValueRAMs KVR29N21S8/16 is a 2G x
64-bit (16GB) DDR4-2933 CL21 SDRAM (Synchronous DRAM), 1Rx8,
memory module, based on eight 2G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-2933 timing of
21-21-21 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
FEATURES:
FEATURES:
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.23 (31.25mm)
RoHS Compliant and Halogen-Free
GroupName | Name | Value |
---|---|---|
Specifications | Capacity | 16GB |
Specifications | Error Checking | No |
Specifications | Form Factor | DIMM 288 PIN |
Specifications | Frequency | 2933MHz |
Specifications | Ranking | Single Rank |
Specifications | Series | ValueRam |
Specifications | Type | DDR4 |
Specifications | Voltage | 1.2v |
Specifications | Warranty | Limited Lifetime |